Product Categories
Contact Us
Tel: 86 (0)371-86541576
E-mail: hezhengjie@mingtai-al.com
Gongyi City,Henan Province,China
You are here: Home > News >
Brief introduction of Mingtai aluminum tanker plate
- 2017-05-15 10:02 -
Mingtai Aluminum as a professional China aluminum manufacturer will make a brief introduction for you about the aluminum tankers.
The length of the commonly used tanker aluminum plate is 12.5 meters or less, the width is less than 2.2 meters, the thickness is generally 5,6,7,8 mm, a complete tanker tank, generally need 4-6 pieces of aluminum welded together, one of the most important Of the 5083H111 aluminum plate, both sides of the tank cover is 5083-O state aluminum, O state is softer, and the lid need to bend, part of the partition is also used 5083-O state. In addition, there are some manufacturers using 5454H111 aluminum production tank.



Henan Mingtai Aluminum is a large aluminum processing company that produces aluminum, aluminum and aluminum foil. It is made of 1-8 series aluminum foil, and aluminum plate for tanker body is mainly 5 series and 6 series product. 5 series is magnesium as the main alloying elements of aluminum alloy, 6 series is magnesium, silicon as the main alloying elements and Mg 2Si phase for the strengthening phase of aluminum alloy, including the main alloy grades include: 5052 aluminum, 5083 aluminum, 5754 aluminum , 6061 aluminum plate and 6082 aluminum plate.
5052 aluminum plate for the AL-Mg alloy aluminum plate is the most widely used a rust-proof aluminum, high strength and corrosion resistance. But it cannot be heat treatment to strengthen, in the semi-cold hardening when the plastic is still good, cold hardening when the plastic low, polished.
5083 aluminum alloy in the high strength, heat treatment of the alloy, with good machinability, corrosion resistance and welding performance is widely used in traffic vehicles, such as ships, aircraft, vehicles and pressure vessels (tankers, refrigerated trucks, refrigerated containers) and so on.
6061 aluminum plate with moderate strength, good corrosion resistance, weldability, its processing is good, can be anodized coloring. Because it contains a small amount of Cu, and thus the strength is higher than 6063, quenching sensitivity than 6063 high, after the extrusion can not be achieved by the wind quenching, re-treatment and quenching time can be.
6082 aluminum sheet is heat-treatable reinforced aluminum alloy sheet, with medium strength and good welding performance, corrosion resistance, mainly for transportation and structural engineering industry.