Product Categories
Contact Us
Tel: 86 (0)371-86541576
E-mail: sales@mingtai-al.com
Gongyi City,Henan Province,China
You are here: Home > News >
5052 Aluminum with High Anti-rust Performance for Air Ship Air Conditioning
- 2017-05-30 09:42 -
Working on the ship, the ship air conditioning is an essential environmental optimization equipment for the crew, which can purify the air in the cabin, control the temperature and humidity, so as to provide the crew with a comfortable working and living environment, Electrical equipment and precision instruments to provide a suitable working environment.
At present for this area, we not only make a research in the performance factor of air conditioning but also continue to improve the appearance of air conditioning appearance, and enhance the corrosion resistance of sheet metal. Compared with the land air conditioning, the ship air-conditioning has a long-term run in the high humidity in the ocean, high salt spray, high corrosive environment. It’s very important to prevent corrosion of sheet metal parts to reduce the life of the air conditioner. In order to ensure that the ship's air-conditioning sheet metal parts in the high salt spray, high corrosion in the marine environment for long-term use, you must strictly carry out the surface of the anti-corrosion treatment.



For the ship air conditioning, due to long-term working in the high corrosive environment, the first solution in the surface of the sheet metal is to spray five lacquer, which has a high demand for the process requirements, if the time interval is not good, the adhesion between the paint layer and the paint layer is reduced.
Another simpler solution is to use a cold-rolled plate as a sheet, which has good properties, that is, by cold rolling, it is possible to obtain a cold rolled aluminum roll or an aluminum plate having a higher thickness and a higher precision, cold-rolled plate surface is clean and bright, easy to coating processing, variety, wide use, both with high stamping performance and low yield point characteristics, so cold rolled plate with a wide range of uses. Of which 5052 aluminum alloy is the best choice.
5052 aluminum alloy is Al-Mg alloy, cold processing performance, with good molding processing performance, corrosion resistance, is the most widely used rust-proof aluminum; this alloy is high strength, especially with anti-fatigue strength, plasticity and high corrosion resistance, the semi-cold hardening is still good. When 5052 alloy aluminum is used for the ship air conditioning sheet metal parts, its material need to be oxidation treatment to improve the adhesion and corrosion resistance of paint, both sides are in the forming process after painting. Our company produced 5052 alloy aluminum alloy of good quality, stable performance, with a mature '1 +1' hot-rolled production line, we will be based on the actual needs of customers, to provide customers with different status of 5052 aluminum. Welcome to inquire: 0371-86628262.